H1 Door Windows

Free for non-commerial postings

Moderator: the JoKeR

H1 Door Windows

Postby galtor » Mon Dec 12, 2011 8:20 pm

I have for doors and need the windows
User avatar
galtor
H1 Mentor
H1 Mentor
 
Posts: 79
Joined: Sat May 08, 2010 7:52 pm
Location: Toronto, Canada

Postby powerstrgl » Tue Dec 13, 2011 4:07 am

The glass for the doors is flat temper'd glass, similar to the windshield, Any local glass shop can cut it for you. You just measure how big you want it give them the measurements and they cut it right there, if your not sure how tight it should be in the seals just take one front and rear door w/you don't forget the seals to glass shop they can measure them and just slide them in right there.
User avatar
powerstrgl
H1 Master
H1 Master
 
Posts: 216
Joined: Thu Feb 13, 2003 6:07 pm

Postby galtor » Tue Dec 13, 2011 2:38 pm

so how do they open and close. Thanks for the info
User avatar
galtor
H1 Mentor
H1 Mentor
 
Posts: 79
Joined: Sat May 08, 2010 7:52 pm
Location: Toronto, Canada

Postby powerstrgl » Thu Dec 15, 2011 1:48 am

You have to buy regulators and window channel, most of the time it's almost easier to go to local wrecking or junk yard and look for a jeep wrangler, or similar and just remove the entire track assembly power or manual and bolt it in the door but you'll still have to buy glass, or find used military surplus doors and get the assembly from them they are either up or down and very simply to put in but again still getting glass
User avatar
powerstrgl
H1 Master
H1 Master
 
Posts: 216
Joined: Thu Feb 13, 2003 6:07 pm

Postby galtor » Thu Dec 15, 2011 5:16 am

thanks for the info
User avatar
galtor
H1 Mentor
H1 Mentor
 
Posts: 79
Joined: Sat May 08, 2010 7:52 pm
Location: Toronto, Canada

Postby capps » Sat Mar 24, 2012 3:14 pm

The regulators for roll up windows were packed in the truck when it was shipped. I had purchased the window felt for the channels and they were there also. The old Urban Gorilla manual showed how a glass company should measure the window size.
Last edited by capps on Fri Mar 30, 2012 12:55 am, edited 1 time in total.
User avatar
capps
H1 GOD
H1 GOD
 
Posts: 1084
Joined: Mon Jan 06, 2003 11:54 pm
Location: Outside Atlanta, GA

window

Postby galtor » Sun Mar 25, 2012 1:55 pm

great, someone must of scooped them
User avatar
galtor
H1 Mentor
H1 Mentor
 
Posts: 79
Joined: Sat May 08, 2010 7:52 pm
Location: Toronto, Canada


Return to Buy, Sell or Trade

Who is online

Users browsing this forum: No registered users and 1 guest

cron